When I purchased a new used auto a few weeks back, the previous owner decided that a white and blue colour combination would be the ultimate in show car quality. Unfortunately, the '80s color selection was an eyesore that needed to be addressed. Rather than spending a ton of money redoing the interior, we gave Color Bail a try after talking to one of their reps at last year's SEMA testify and coming away thoroughly impressed with their production's results. We've used the more popular SEM vinyl and plastic dye in the past and were fully aware of how well it worked, but upon using the Color Bond product for our much needed color modify, we have to admit that this stuff works only equally good, tin can we dare to say fifty-fifty better?
The color changing procedure took a total of a day and a half due to the fabric inserts that I wanted to keep blue. Check out that interior color combination. Sonny Crockett from Miami Vice is calling!
Nosotros purchased a quart of Color Bail to use with our Eastwood Concours HVLP spray gun. Color Bail also offer a spray can version for added convenience but for the amount of work that needed to be redone to this motorcar, using the cans would add up to more than I intendance to count. In the stop we used a chip over half a can. Color Bond likewise offering carpet dye, which dries to the touch while keeping the fabric pliable, not hard and caked on like spray paints or inexpensive dyes.
Clean the surface using Pre Cleaner from Eastwood and be certain to fully dry the pieces before moving on to the side by side phase.
Nosotros used a soft scouring sponge to agitate the surface and remove any grime and contaminants that would affect proper bonding. Cleanliness is the key for proper adhesion! For hard plastic surfaces, nosotros recommend using adhesion promoter.
Prepping the surface with tape and outlining the area between the cloth and vinyl took the bulk of our time. We used a minor paintbrush to get in between the cracks and piping for a cleaner look.
We sprayed the function with even coats of dye. Nosotros liked the fact that Color Bond speedily absorbs into the vinyl and can exist handled in less than a infinitesimal. Observe upon dyeing that it retains the original vinyl texture/grain to give our seats an OEM advent.
Once the pieces were dried (which was not as well shiny of a gloss every bit previously shown in a higher place), they were installed. Looks so much better!
The door panels were dyed every bit well to lucifer the rest of the interior. Colour Bail offers splendid adhesion properties. Nosotros literally pawed at the surface but nada came off. We even tried using a screwdriver to test its durability. All in all, we were pleased with the final results and won't be embarrassed to drive this car in one case it'southward upwards and running.
Color Bond besides offers a clear UV protectant for additional protection from the sun'due south harmful rays, making information technology perfect for areas such as the dashboard.
0 Response to "How To Change Interior Color Of Car"
Post a Comment